Multi-OperatoryAir Abrasion AccessoryInstructions for UsePlease read this manual thoroughly prior to first useCopyright Notice:Copyright © 1999, Kreat
990229 REV C103. System Unpacking, Setup, and Operational VerificationUnpackingCarefully remove the unit from the shipping container and inspect for
990229 REV C11 Mounting Bracket and Connector Installation3. Install the hanger bracket onto the rear of the Multi-Operatory Accessory usingthe Phil
990229 REV C12the resulting pinch tube/abrasive tube assembly into each of the two connectorfittings on the manifold assembly.12. Install the pinch tu
990229 REV C135. Depress the Beam Intensity up or down arrow keys to select the desiredoperating Beam Intensity.6. Depress the Particle Energy up or
990229 REV C144. Operating InstructionsOperationOnce installed, the Kreativ Multi-Operatory Accessory should have no impact on thenormal use of the a
990229 REV C155. Preventive Maintenance and TroubleshootingPreventive MaintenanceWARNING: Always disconnect power from the Multi-Operatory Accessory
990229 REV C168. Replace the 4 knurled thumb screws through the pinch tube blocks and tightenuntil the pinch tube top blocks are pulled down and mee
990229 REV C17 Cannot get Mach 5/5+from “Standby”into “On”conditionRecycle power turn-on sequence: Turn Mach 5/5+off, disconnect power from Multi-Ope
990229 REV C18 Remote display notilluminated• Ensure remote cable is plugged in.• Ensure power is connected to unit.• Ensure remote cable is plugge
990229 REV C19Multi-Operatory Parts/AccessoriesDescription Reorde
990229 REV C2TABLE OF CONTENTS1. INTRODUCTION AND GENERAL INFORMATION 3INTRODUCTION 3PURPOSE OF THIS MANU
990229 REV C20Description Part No.Interconnect tube assembly, 42
990229 REV C216. Returns, Adjustments and Limited WarrantyReturns and AdjustmentsWarranty claims must be made promptly and received by your nearest
990229 REV C22The foregoing limited warranty is exclusive and in lieu of all other warranties, whetherwritten, oral, or implied, and shall be purchase
990229 REV C31. Introduction and General InformationIntroductionThe Kreativ Multi-Operatory Air Abrasion Accessory is an accessory extending theuse
990229 REV C4Chapter Four is an operational description of the Kreativ Multi-Operatory accessory.Chapter Five provides preventive maintenance and trou
990229 REV C5Figure 1Installation Drawing (front-mount position)Functional DescriptionPinch Tube Screws - Access is provided to the pinch tubes by rem
990229 REV C6Handpiece Tube - Connected to the output end of each pinch tube, and routes toeach operatory, provides air/powder to the handpiece (handp
990229 REV C72. SafetyWarningsWARNING: Do not attempt to internally service the Multi-Operatory unit beyondthose items described in the maintenance
990229 REV C8Product Safety LabelingRecycling InstructionsDevice:• All covers and housings should be recycled as steel or aluminum.• Plastic parts s
990229 REV C9COMPONENTS LIST OF MATERIALSEnclosure and all brackets Steel, AluminumPrinted Circuit Boards Epoxy, FR4THERE ARE NO HAZARDOUS MATERIALS P
Commentaires sur ces manuels