Welch-allyn Image Capture System - User Manual Manuel d'utilisateur télécharger pdf (Page 17)

Directions for Use Chapter 2 Equipment Setup 9

Review Draft Company Confidential Aug 24, 2004

Figure 6. RS-232 Cable connections

6. Plug the DV Converter, the Video Colposcope, and the Video Colposcope Monitor

power cords into a hospital-grade outlet.

7. Turn on the Video Colposcope and then press the button on the back of the converter

to power on the DV Converter. Finally, boot up the computer.

8. Verify the DV Converter light displays analog. If it does not:

a. Turn off and unplug the DV Converter.

b. Set dip switches 2 and 6 to the on position and all others to off.

c. Reconnect the converter and power on.

9. If a Digital Video Device dialog box pops up, select Take no action, check Always

perform the selected action, and select OK. If you make these selections, the dialog

box will not appear again.

RS-232 Cable

S-Video Cable

Power Cable

RS-232 Cable

Power Cable

Video Colposcope

Notebook Computer

Desktop Computer

RS-232 Cable

Power Cable

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 49 50

Pas de commentaire

Welch-allyn Image Capture System - User Manual Manuel d'utilisateur Page 17