Welch Allyn SCANTEAM 2380 WAND Spécifications télécharger pdf (Page 11)

1–1

Introduction to the SCANTEAM 2380

INTRODUCTION TO THE

SCANTEAM 2380 SCANNER

1.1 Introduction

The SCANTEAM 2380 Decoder Output Scanner Keyboard Wedge is a

convenient and cost effective way of adding bar code data entry capability

to the IBM (and IBM compatible) PC/XT/AT personal computers and IBM

PS/2 Models 30, 50, 60 and 80.

Additional interfaces are continually being developed; check with Welch

Allyn or an authorized representative for availability.

As described on page 1–4, the SCANTEAM 2380 is available in the

following models: 2380/J and 2380/K with visible red illumination. All

models of the 2380 are available with stainless steel scanner housings. The

contents of this manual applies to these devices except where

differentiated.

The SCANTEAM 2380 is designed to read and decode any of nine (9)

popular bar code symbologies and output the bar code data to the keyboard

port in the same format the keyboard does.

1.2 Hardware Description

The SCANTEAM 2380 system consists of the wand body and a 6’ (1.8m)

coil (extended) interface cord. When connected as shown in Figure 1.1, the

2380 keyboard “wedge” device provides a transparent interface between

the keyboard and the keyboard input port of the host device.

Operation of the SCANTEAM 2380 with a particular computer is

accomplished by installing the proper “Y” interface cable and

programming the proper keyboard interface routine using the TERMINAL

SELECTION sheet of the programming menu.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 67 68

Pas de commentaire

Welch Allyn SCANTEAM 2380 WAND Spécifications Page 11