Welch Allyn SCANTEAM 2380 WAND Spécifications télécharger pdf (Page 34)

4–10

Programming the Scanner

(3) When Keyboard Function Records are entered, any

Preambles/Postambles which may have been programmed will not be

added to the output transmission.

Example: Keyboard Function Records (Commercial Application)

The following examples illustrate the effect of Keyboard Function Records

on data transmission.

Scanner Data

In this example the SCANTEAM 2380 is connected to an IBM PC, and the

function key F10 is to be emulated using a Keyboard Function Record

entered through the Scanner. The symbology Full ASCII Code 3 of 9 has

been enabled.

When configured in this way, scanning a Code 3 of 9 label containing the

following characters:

/ C 3 1

will produce a decoded output of (#31).

Keyboard Type

This menu selection permits you to program the 2380 to output data using

the following keyboard operating modes: NORMAL, CAPS LOCK, CRTL

+ AND SHIFT LOCK.

NORMAL

This is the Primary Type keyboard selection. When NORMAL is enabled,

the 2380 will output scanned data to the terminal in conventional bar code

format.

CAPS LOCK

When you are operating in CAPS LOCK mode, the 2380 should also be

programmed for CAPS LOCK mode (i.e., CAPS LOCK enabled).

CTRL + When the 2380 is programmed to operate in CTRL + mode,

ASCII function codes 00 to 1F are sent to the terminal through a CTRL +

sequence (i.e., “CR” = CTRL + M).

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 67 68

Pas de commentaire

Welch Allyn SCANTEAM 2380 WAND Spécifications Page 34