Welch-allyn 767 Diagnostic System - User Manual Manuel d'utilisateur

767 Diagnostic System3.5v 767 Wall TransformerListed to:UL 60601-1CSA C22.2 No. 601Patent Pending

6Change Time:The following steps should be followed when resetting the time:1. Remove clock module by prying the clock faceplate from unit housing.2.

7Mounting the Third Handle ModuleA Phillips screwdriver is needed to connect the Third Handle Module.Mounting the Third Handle Module:1. Disconnect ma

8MaintenanceLike any other piece of electrical equipment, periodic electrical inspections should be performed by qualified personnel. Welch Allyn reco

9SpecificationsModel No. 76720 3.5v 767 Wall Transformer (two-handle model with clock, instrument heads not included).76710 3.5v 767 Wall Transform

10

Welch Allyn, Inc.4341 State Street RoadPO Box 220Skaneateles Falls, NY 13153-0220U.S.A.Telephone: 800-535-6663 or 31

Thank you for purchasing the Welch Allyn 3.5v 767 Wall Transformer. This manual is meant to provide product specifications and instructions for usage

Table of ContentsWarnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Avertissements . . . . . . . . . . . . . .

1WarningsAvertissementsUSE HOSPITAL-GRADE POWER INLET CORD ONLY.REPLACE CLOCK BATTERY AS INSTRUCTED WITH Maxell 43 OR EQUIVALENT BATTERY.GREEN PILOT L

2Mounting InstructionsFasten mounting plate to the wall with enclosed screws, making sure that the screw hole flanges face away from the wall and the

3OperationHandles Handles will accept any 3.5v Welch Allyn instrument head.Rheostat Located on each handle. Turn clockwise to increase light output, t

4Operating InstructionsHandles will accept any Welch Allyn 3.5v instrument head.After plugging power cord into any 108-125v, 60 Hz outlet, turn power

5Clock OptionStart/Stop button Use this button to start and stop seconds count. Press once to start the seconds. Press again to stop seconds.Clock but