Welch-allyn Insight Instruments Solarc Light Source - User Man Manuel d'utilisateur télécharger pdf (Page 17)

Insight Instruments 13

Maintenance And Repair

For minor trouble, refer to the troubleshooting section in this manual for

possible causes and corrective action.

Only qualified personnel should make electrical inspections of the Insight

Instruments Light Source.

Repair must be performed by authorized personnel. Failure to do so

invalidates warranty.

Service

For Service or Repair:

Insight Instruments, Inc.

5400 S. Bryant Ave

Sanford, FL 32773

Tel: (800) 255 8354 or (407) 324-2727

fan is

operating.

The lamp was not able

to “cool down” before

restarting.

Wait at least 15 seconds after

turning the Light Source off

before turning it back on.

The Light Source has

overheated.

Verify that all ventilation slots

and the fan area are not

obstructed. Mount the Light

Source on the supplied

mounting bracket and verify

there is always at least 3-

inches clearance.

The lamp has burned

out.

Replace with a new Insight

Instruments lamp. Refer to

the lamp replacement section.

1 2 ... 12 13 14 15 16 17 18 19 20

Pas de commentaire

Welch-allyn Insight Instruments Solarc Light Source - User Man Manuel d'utilisateur Page 17