Welch-allyn LC101 CO2 Module - User Manual Manuel d'utilisateur télécharger pdf (Page 71)

LC101 CO

Module OEM Implementation Manual

Appendix C - Error Messages & Recovery

Welch Allyn OEM Technologies Conﬁdential Page 71

57, CO

Sensor Not Found

Bench, or C-Cap, not present on Main Board.

60, CO

Sensor EEPROM Error/Revision #

Revision # read from the CO

sensor EEPROM is not in the 1.xx format.

65, CO

Sensor EEPROM Error/Read/Write

A read or write error to the CO

sensor EEPROM has occurred.

66, CO

Sensor EEPROM Error/CCITT/CRC Code

CCITT/CRC code read from the CO

sensor EEPROM is invalid.

70, CO

Sensor Temperature Too High

The CO

sensor’s temperature is greater than 60

C for more than 30 seconds.

• Check for the presence of an external excessive heat source that is in close proximity

to the Module. Remove the source or relocate the Module.

71, CO

Sensor Temperature Too Low

The CO

sensor’s temperature is less than 5

C for more than 30 seconds.

• Check for excessive cold ambient conditions or the presence of an external cold

source that is in close proximity to the Module. Remove the source or relocate the

Module.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 97 98

Pas de commentaire

Welch-allyn LC101 CO2 Module - User Manual Manuel d'utilisateur Page 71